HERKULES GW/R-2-T, Руководство пользователя

Страница: 6 / 19

Operation
Filling the Gun Washer with Fluid Placing Equipment in the Gun Washer
1 Close ball valve located on the bottom of the tank. To clean guns not mentioned here, use the long or short
stem supports as needed (see Fig. 2). For questions or
2 Pour five gallons (18.9 liters) of high quality slow
adapter kits contact your paint gun washer distributor.
evaporating solvent into the tank. DuPont 3661S or
equivalent is recommended. Siphon Feed Guns
Place the gun siphon tube on the short stem support.
Preparing the Equipment to be washed
Gravity Feed Guns
1 Remove paint cup or paint line and the air line from Place long stem support over one of the short stem
the paint gun. supports. Place paint inlet of gun on long stem support.
2 Drain excess paint from cup and gun. *For Gravity Feed, High Volume Low Pressure Guns an
adapter kit (part number 23K) is available for best
3 Remove all gauges and regulators. cleaning.
4 Lock the gun trigger in the open position by placing Pressure Feed Guns
the trigger lock around the gun handle and trigger Place long stem support over one of the shorter stem
(see Fig. 2). supports. Place paint inlet of gun on long stem support.
CAUTION
Pots and Cups
All pressure gauges must be removed before placing the Place pots and/or cups on divider platform over front
equipment in the gun washer to avoid damaging the spray nozzles.
gauges.
Figure 2
Trigger Lock
Long Stem Support
Short Stem Support
HVLP Gun Adapter
(Sold Separately)
01001245(206)
Siphon Feed Gun
Paint Cup
Page 6 of 19