
Assembly
Stand and tub connections
STEP 1
Attach the four legs to the frame using (4) 1/4-20 x 1/2"
hex bolts, (4) #10 flat washers, (4) 1/4" lock washers
and (4) 1/4" acorn nuts per leg (see fig.1). Hand tighten
(2) 1/4-20 x 5/8" hex bolts where noted in fig.1.
Note: The leg assembly containing the timer and the
leg assembly containing the filter/regulator must be
positioned as shown in fig.1 .
STEP 2
Position the pump mount bracket between the timer
leg assembly and the filter/regulator leg assembly.
Attach the pump mount bracket to the stand using (2)
1/4-20 x 3/4 hex bolts, (2) #10 flat washers, (2)
1/4" lock washers and (2) 1/4" acorn nuts per leg
(see fig.1).
STEP 3
Attach the pump to the stand using the (2) 1/4-20 x 1
hex bolts, (2) 1/4" flat washers, (2) 1/4" lock washers
and (2) 1/4" hex nuts per leg (see fig.2).
STEP 4
Attach the ball valve to the lower bulkhead on the
bottom of the tub (see fig.3).
STEP 5
Attach the white plastic muffler to the exhaust
port of the pump (see fig.3).
STEP 6
Slide (1) #10 flat washer then (1) 1/8" nylon spacer
then the timer knob over the shaft protruding from
the timer leg assembly (see fig.3)
fig.3
Ball valve
Muffler
Hex bolt
1/4-20 x 1
1/4" Hex nut
1/4" Lock washer
Flat washer 1/4
fig.2
fig.1
Hex bolt
1/4-20 x 1/2
Flat washer #10
1/4" Acorn nut
1/4" Lock
washer
Hex bolt
1/4-20 x 1/2
Flat washer #10
1/4" Acorn nut
1/4" Lock
washer
Timer Leg
Filter/Regulator
Leg
Hex bolt
1/4-20 x 5/8
Page 5 of 20