Heritage Bathrooms TDCC00, Инструкция по установке и руководство пользователя

Страница: 6 / 16

8*
Installation – Basin / Bath Taps
1. Identify all components are present prior to starting installation.
2. Using the washer (10) and backnuts (11) secure the taps to the basin by tightening the backnuts
onto the pre-fitted threaded tails (9). A suitable spanner may be required to fully tighten the
backnuts (11).
3. Connect the hot and cold water supplies to the
connecting pipes
4. Turn on the water and fully open the mixer,
allowing it to run for a few minutes and check
all joints and connections for any leaks.
2
1. Indice x2
2. Handle Screw x2
3. Metal Washer x2
4. Handle x2
5. Shroud x2
6. Valve x2
7. Washer x2
8. Tap Body* x2
9. Threaded Tail x2
10. Washer x2
11. Backnut x2
6
1
3
4
5
7
9
10
11
*Tap body shown is for illustration purposes only. The
installation process applies to all models listed for this
booklet
05