Before starting any installation project please consider the following:
•
Prior to drilling into walls, check there are no hidden electrical wires or cables or water supply pipes with the
aid of an electrical detector.
•
If you use power tools do not forget:
- Wear eye protection.
- Unplug equipment after use.
•
This product must not be modified in any way as this will invalidate the guarantee.
•
These fittings need to be installed in accordance with and meet the requirements of the Water Supply
(Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
Safety Note
•
Please read these instructions & retain for future use. All products manufactured & supplied
by Heritage are safe, provided they are installed correctly, used correctly, and receive regular
maintenance in accordance with these instructions.
•
If you are in any doubt about your ability to install this product safely you must employ
the services of an experienced, qualified plumber.
02
General Specifications
Operating pressure range (bar)
Min
Max
½” Basin Taps
0.1
5.0
¾” Bath Taps
0.2
5.0
Bath Filler
0.2
5.0
Bath Shower Mixer
0.2
5.0
Maximum Static Pressure – 10.0 bar
NOTE:-
Nominally equal (balanced) inlet supply pressures are recommended for optimum
Performance of mixer taps.
All products manufactured and supplied by Heritage Bathrooms are safe to use provided that they are installed,
operated and receive regular maintenance in accordance with these instructions. This product needs to be installed in
accordance with, and meet the requirements of the Water Supply (Water Fittings) Regulations 1999 and current by-
laws. For full Installation Requirements & Notes (IRN) please visit wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure ease of future maintenance. Before installing this
product the water supply must be thoroughly flushed in order to remove any swarf, solder etc. This product must
not be modified in any way as this will invalidate the guarantee. Full access must be made available for future
maintenance/servicing purposes. If in doubt, contact a registered plumber or your Local Water Authority or the
Secretary of the Institute of Plumbing, address as follows:-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB,
Tel: 01708 472791
