HENX H36DCG120A01, Оригинальная инструкция

Страница: 26 / 33

USING THE MACHINE
WARNING: Dress properly to reduce the risk of injury when operating the brush
cutter. Do not wear loose clothing or jewelry. Wear eye and ear/hearing protection.
Wear heavy duty, long trousers, boots and gloves. Do not wear short trousers,
sandals or go barefoot.
Before operating, look around you to ensure a safety working area without other p
eople, animals or any loose objects.
Make sure they are at least 15m away. And then check for eye protection , proper
clothing and balanced footing.
Before each use check for damaged/worn parts.
Check the trimmer head, 3-teeth blade, guard, guard accessory, bike handle and
double-shoulder strap and replace any parts that are cracked, warped, bent or
damaged in any away. The line-cutting blade on the edge of the guard accessory
can dull over
time. It is recommended that you periodically sharpen it with a file or replace it
with a new blade.
After each use, clean the brush cutter.
USING WITH TRIMMER HEAD
Adjusting cutting line length
The trimmer head allows the operator to release more cutting line without stopping
the motor. As line becomes
frayed or worn, additional line can be released by lightly
tapping the bump knob on the ground while operating the trimmer (Fig. V).
NOTICE
: Line release will become more difficult if the cutting line becomes too
short.
WARNING
: Do not remove or alter the line-cutting blade assembly. Excessive
line length will cause the mo- tor to overheat and may result in serious personal
injury.
LINE REPLACEMENT
NOTICE
: Always use the recommended nylon cutting line with a diameter that
does not exceed 2.3 mm. Using line other than that specified may cause the