HENX H36DCG120A01, Оригинальная инструкция

Страница: 17 / 33

supply (i.e. remove the plug from
the mains or remove the disabling device).
Whenever leaving the brush cutter unattended;
◾
before clearing a blockage;
◾
before checking, cleaning or working on the brush cutter;
◾
after striking a foreign object;
◾
whenever the brush cutter starts vibrating abnormally.
Maintenance and Storage
a) Disconnect the brush cutter from the power supply or remove the disabling device)
before
carrying out maintenance or cleaning work.
b) Use only the manufacturer’s recommended replacement parts and accessories.
c) Inspect and maintain the brush cutter regularly. Have the
machine repaired only by an
authorized technician.
d) When not in use, store the brush cutter out of the reach of children.
Noise and Vibration Declaration
The declared vibration total value and the declared noise emission values have been
measured in accordance with a standard test method and may be used for comparing
one tool with another. The declared vibration total value may also be used in a
preliminary assessment of exposure.
Warning!
The vibration and noise emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used, in particular, what
kind of work piece is machined.
It is necessary to identify safety measured to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle
in addition to the trigger time)
Try to minimize the impact of vibration and noise. Exemplary measures to reduce
vibration exposure include wearing gloves while using the tool, limiting working time, and
using accessories in good condition.