User manual // Charging Unit Premium
HENSEL-VISIT GmbH & Co. KG
7
1 Introduction
Dear photographer,
Congratulations! With this Hensel item you have purchased a
powerful high-quality unit.
In order to enable you to successfully and productively work with
this system for many years, we have enclosed some advice
concerning the use. Only by observing this information you can
claim for warranty, avoid any damages and extend life duration of
the item.
Hensel-Visit has taken great care to manufacture a secure and
high-quality flash system and accessory range
– of course, subject
to all existing regulations and applying to all necessary quality
controls.
If there arise any questions concerning the use or anything else,
please do not hesitate to contact us at any time required.
HENSEL-VISIT GmbH & Co. KG
2 Description
The microprocessor operated Charging Unit Premium (Code
5671) serves to the purpose of charging the following
accumulators:
- Code no. 4791, Lead-gel battery, 12V,12 Ah
- Code no. 1496, Lead-gel battery, 12 V, 7 Ah (switches auto-
matically to 2 A) und
- Code no. 1494, lithium battery for Premium Plus
The battery pack can be directly (internally) charged via
connection to the Porty unit or via connection to the battery pack
drawer (externally).
The Battery Charger Premium covers a wide input voltage range
of 90 to 260 VAC. For the above-mentioned input voltage,
charging takes place in approx. 3 hours. In the front panel of the
housing there is a LED charging indicator.
User Manual
– Date of Revision: 2012-01
Technical data are subject to change. No guarantee for misprints.
The listed values are guide values and should not be understood
as binding in a legal sense. The values can differ due to
tolerances in used components.
