Hensel-Visit FORIS 1000 Скачать руководство пользователя страница 8

Страница: 8 / 72

Safety



Check the device annually for operating safety (see the maintenance
schedule on page 57).



Regularly clean the outside of the device with a dry cloth.



Have damaged cables and the device replaced immediately by the
authorized Customer Service only.

Prevention of serious injuries due to fire

When the flash tube is triggered, sparks might arise, which could lead to
fire. Serious injuries can result.



Do not use the device in the vicinity of flammable materials such as
decorative materials, paper, etc.



Do not store flammable materials such as decorative materials, paper,
etc. in the vicinity of the device.

Prevention of serious injuries due to fire or explosion of the rechargeable
battery

If the rechargeable battery is handled incorrectly, it can catch fire or
explode.



To charge the rechargeable battery, only use chargers specifically
designed for it.



Fully charge the rechargeable battery before commissioning.



Only charge the rechargeable battery in closed rooms and at room
temperature.



In case of overheating of the device or charging cable or in case of
contact with liquids, immediately stop charging or using the device.



Do not continue charging or using the device until the rechargeable
battery has cooled down to the point it is merely warm to the touch.

Prevention of serious skin and eye injuries

Triggering a flash in the direct vicinity of the eyes can result in skin and eye
injuries.



Observe the required minimum distance for the type of light shaping
tool and flash intensity.



Do not look into the light shaping tool in case the flash is triggered
accidentally.



In case of skin or eye injuries, consult a doctor immediately.

Содержание FORIS 1000









































































Результаты поиска

Содержание FORIS 1000

Отзывы:

Похожие инструкции для FORIS 1000

Бренды по названию

Популярные бренды

Hensel-Visit FORIS 1000, Руководство пользователя

Результаты поиска

Содержание FORIS 1000

Отзывы:

Похожие инструкции для FORIS 1000

Бренды по названию

Популярные бренды