Henny Penny EVOLUTION ELITE EEE-181, Техническое руководство

Страница: 21 / 118

Model EEE-182
4-1
This mode allows you to program the following:
1. Press and hold button until “PROG” shows in the
display, followed by “ENTER CODE”.
2. Enter code 1, 2, 3 (first 3 product buttons). “PRODUCT”
and “PROGRAM” show in the displays, followed by
“SELECT PRODUCT’ and “-P 1-” (ex: NUG).
Change Product Names
3. Use the and buttons to scroll through the 40
products, or press the desired product button.
4. Press button and “NAME” shows in the left display
and the product (ex: NUGGETS) shows in the right display.
5. Press
√
button and the first letter in the name flashes. Press
a product button and the flashing letter changes to the first
letter under the product button that was pressed. For exam-
ple, if is pressed, the flashing letter changes to an “A”.
Press the same button again and the flashing letter changes
to a “B”. Press it again and the flashing letter changes to
a “C”. Once the desired letter shows in the display, press
button to continue to the next letter and repeat the
procedure.
Press and hold the right
X
button to exit Program Mode, or
press button to continue on to “COOK TIME”.
Assign Button
6. Press button until “ASSIGN BTN” shows in the
display, along with the product (ex: NUGGETS). If this
product already has a product button assigned to it, that
LED will be lit. To assign other product buttons to that
product, press and hold the product button for 3 seconds
and that LED stays lit. To remove a product from a button,
press and hold the product button with a lit LED and the
LED goes out.
SECTION 4. PRODUCT PROGRAM MODE
4-1. MODIFYING PRODUCT
SETTINGS
• Include in Filter Count (Global)
• Filter at X no. of loads (Mixed)
• Load Compensation
• Load Compensation Reference
• Full Heat
• PC Factor
• Change Product Name
• Assign Button
• Change Times & Temp
• Change Cook ID
• Alarms
• Quality Timers
July 2016