Henkel Loctite 135550, Руководство по эксплуатации

Страница: 11 / 40

11
5 Dispensing
5.1 First Operation
5.1.1. Priming the Feed Line
● Check that the product reservoir, the dispensing valve and the footswitch are
connected correctly according to their operating manuals.
● To avoid air bubbles during dispensing, the product line must be filled and then purged
of air.
● Position the dispensing valve as specified in its instruction manual to ensure bubble-
free filling of the product line.
Caution!
Place a container under the dispensing valve since the product will flow out.
● Switch the power switch
7 to the position I (ON).
● With the pressure regulator
8 set the
dispensing pressure to 0.50 bar
(approx. 7 psi).
● Press button until the product flows
free of bubbles from the dispensing
needle.
● For viscous products, increase the
pressure slowly in steps until the
product flows out.
Caution!
Hold the dispensing valve pointing downward to prevent uncontrolled squirting out of the
product.