Technical Process Bulletin
BONDERITE C-AK 9045-6 AERO
WATER BASE CARBON REMOVER
(KNOWN AS TURCO 9045-6)
2 of 3
CONTROL:
Apparatus:
1. Hydrometer, 1.000 -1.200
2. Cylinder, 250 mL
Procedure:
1. Obtain a sample from the tank and cool to room temperature.
2. Pour the cooled solution into a cylinder, place a clean and dried hydrometer (approximate range 1.000 - 1.200) into the
solution and allow it to come to equilibrium. Allow several minutes for this before taking the reading.
Maintenance:
1. For every 0.005 units below 1.070, add 1 gallon of fresh BONDERITE C-AK 9045-6 AERO for every 100 gallons of
tank
solution.
2. For every 0.001 units above 1.070, add 1 gallon of water for every 100 gallon of tank solution.
TANK MAINTENANCE:
The working level of BONDERITE C-AK 9045-6 AERO should be maintained with additions of fresh BONDERITE C-AK
9045-6 AERO as required. Periodically, allow the tank of BONDERITE C-AK 9045-6 AERO to settle for 24 hours.
Transfer the solution to another tank and remove the accumulated sludge. Replace the solution and bring up to the
working level with additions of BONDERITE C-AK 9045-6 AERO.
DISPOSAL INFORMATION:
Dispose of spent solution per local, state and regional regulations. Refer to HENKEL SURFACE TECHNOLOGIES
MATERIAL SAFETY DATA SHEET for additional disposal information.
PRECAUTIONARY INFORMATION:
WARNING! Causes eye irritation. May cause skin irritation. Harmful if swallowed.
BONDERITE C-AK 9045-6 AERO contains higher alcohols. Avoid contact with eyes, skin and clothing. Do not take
internally. Use with adequate (equivalent to outdoor) ventilation.
Note: VOC = 161 g/L; VOC VP = <1 mm Hg (Rule 11241)
