Hengx CYD-W8+-15K, Руководство пользователя

Страница: 12 / 20

11
3. Use key
+/PRINT/HI
or
HOLD/LO/-
to choose the sampling amount. Available options
are10
、
20
、
50
、
100
、
200
、
500
、
1000( pieces)
.
4. Put the corresponding samples on the weighing pan, and then press key
TARE/
.
“ ”
is displayed momentarily before the display reverts to the sample quantity.
→
5. Remove the samples and put the load on, the scale calculates the amount of the load.
6. To go back to the normal weighing mode, remove the load and press key
UNIT
to select
the proper weighing unit.
Note:
1. The larger the sample size, the more accurate unit weight.
2. Symbol “ ” points at “UW” when calculated unit weight is lower than 4 / 5 of scale division.
7-5 Accumulation, Accumulation Display and Accumulation clear
Accumulation
Under the weighing mode, put the item on the weighing pan. Press key
M+/SAVE
at the
appearance of
“
”
. “
”
is displayed momentarily before the display reverts to the
weight of the item.
Remove the item and the display goes back to zero before the next accumulation can register.
（
The maximum is 99 pieces, display the latest 10 accumulation events in details
）
Accumulation Display
Press key
/MR
to display the accumulation data.
Press key
/MR
or
TARE/
to check a total accumulation event and each accumulation
event in detail.
The number of accumulated weight is indicated at the left bottom.
XX= total accumulation event
；
XX= the single accumulation
Accumulation Clear
To clear accumulation data (total accumulation data or one of the latest 10 accumulation
events), press key
/MR
to display the accumulation data needed and press key
M-/SET
to clear data chosen. When clear total accumulation data, the accumulation signal
“ ” will disappear and back to normal weighing mode. If need to exit without clearing data