Hengx CYD-W8+-15K, Руководство пользователя

Страница: 10 / 20

9
for the other point calibration, move to step 6 to finish the calibration procedure.
5. Add another mass to the current weight. The window will show the total weight. Press
TARE
to complete. “ ”appears at the left bottom.
6. Press
M+/SAVE
to save. After the window displays “ ”, it will return to normal
weighing mode.
7. Operation
7-1 Weighing
Begin with no load on the scale, the display reads zero. Place item(s) to be weighed on the
scale. The display shown is 1000.0g, gross weight.
（
The desired weighing unit should be
selected before weighing, refer to section 7-5.
）
→
7-2 Manual Tare & Preset Tare
When weighing a sample that must be held in a container, tare and store the container weight
into memory.
Manual Tare
1) Under the weighing mode, place the container on the weighing pan, wait till stable
symbol appears, and press the key
TARE
. The container is tared.
→
2) Place the item(s) to be weighed into the container. The weight displayed is the net weight.
3) Remove all items from the weighing pan; the screen displays the tare value.
4) To clear tare with an empty pan, Press down key
TARE
or key
ZERO/ESC
.
Preset Tare
1) Long press key
TARE
for 3 seconds. The scale is now in Digital inputting mode with the
left-most digit blinking.
2) Press
/MR
or
TARE/
to move leftwards or rightwards. Press
+/PRINT/HI
or
HOLD/LO/-
to change the value. Press
M+/SAVE
to save and return to weighing
mode.
3) Put the load on the container, the scale will automatically deduct the value of the
container from the total value.
NOTE:
Press Key
G/N
to display gross and net weight by turns.
4) Clear the load on the container, and press
TARE/
or
ZERO/ESC
to cancel the