Hengx CYD-W8+-15K, Руководство пользователя

Страница: 11 / 20

10
pre-tare.
7-3 Check Weighing
Lower limit setting
1. Begin by pressing down key
HOLD/LO/-
.
The scale is now in digital inputting mode with
the right-most digit blinking.
2. To set the value of lower limit, press key
/MR
to shift leftwards, key
TARE/
to shift
rightwards, key
+/PRINT/HI
to increase setting values and key
HOLD/LO/-
to
decrease setting value. Key
M-/SET
to enable or disable the weighing checking
function.
3. To save the Lower limit and return to weighing mode, Press key
M+/SAVE
Upper limit setting
1. Begin by pressing down key
+/PRINT/HI .
The scale is now in digital inputting mode with
the right-most digit blinking.
2. To set the value of upper limit, press key
/MR
to shift leftwards, key
TARE/
to shift
rightwards, key
+/PRINT/HI
to increase setting values and key
HOLD/LO/-
to
decrease setting value.
3. To save the upper limit and return to weighing mode, press key
M+/SAVE
Note:
Place the sample on the weighing pan, if the sample weight is under the lower weight range
while over or equal 20d, the LOW lamp will light up. If the sample is within the lower and upper
weight range while over or equal 20d, the OK lamp will light up. If the sample is over the upper
weight range while over or equal 20d, the HI lamp will light up.
When changing the Hi-Lo value, the scale will activate the weighing checking function
automatically. If the Lo value is higher than Hi value, then the Hi value will become the
same value as Lo data.
7-4 Simple Counting
1. Press key
UNIT
to select the unit “PCS”.
Note: Ensure to activate the unit “pcs” before operating, see the setting of
P02:
2. Long press key
G/N ,
the ex-factory default sample quantity (10 pcs) is displayed.