manualshive.com logo in svg

Hengst WGM-B, Руководство по эксплуатации

Поделиться
Скачать
Hengst WGM-B Скачать руководство пользователя страница 22

22/46 Operation

Hengst Filtration GmbH

Hengst Filtration GmbH

, RE 51550-B/04.2021

, RE 51550-B/04.2021

5.1.6.7  Activate / deactivate key lock

To prevent unauthorized changes to the settings in the device, a key lock can be set. 

The key lock is activated when at least one digit >0 is entered. During input, the 
active digit is marked with a dot.

The following options are available:

Setting range: 000 to 999

 

▶

Open the value list with the 

u

 key: 

 

 

▶

Set the digit with the 

q

 and 

p

 keys (0 to 9) and confirm with the 

u

 

key. The active digit moves one position to the right.

 

▶

At the end, confirm the code with the 

u

 key.  

The device returns to the submenu.

Notice

: 

Release the keyboard lock by entering: 000.

5.1.7  Switching outputs

All switching outputs are set in the same way. The number of the switching output 
is therefore represented by x. Call up the switching output to be set via the menu of 
the corresponding measurement. 

The assignment of the switching outputs as well as further basic settings, which 
refer to all switching outputs, can be changed in the menu 

Basic settings advanced 

functions

.

In the submenu 

Advanced functions,

 further settings can be made for each 

individual switching output that e.g. influence the switching behavior of the output. 
Testing the output is also possible here.

Содержание WGM-B















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды