13
EN
4.10. CONTROLS AND VERIFICATIONS BEFORE STARTING
VERIFICATION / CONTROL BEFORE THE STARTING
MODALITY AND CHECKS
Check that:
Extraneous objects aren’t on the machine, inside the
hopper, inside the machine neck
Sight control of the indicated parts, to check of objects
or extraneous bodies lacking as for example different
tools, clothes, etc… and that there isn’t however the food
product.
In case of presence, provide with their removal.
Check the cleaning:
• of the machine neck internal parts and of the
grinding group
• of the pusher
• of the machine external surface
All indicated parts surfaces, before the machine use
must be checked visually to verify their cleaning.
For the sight check of the grinding group internal parts,
provide with its disassembly.
In case of molds presence or other type of dirtiness, pro-
vide with the cleaning procedure in accordance with the
chapter 5 indications
Check the integrity:
• of the fixed protections,
• of the loading hopper,
• of the machine neck,
• of the machine body
All fixed protections, etc.., must perform the function for
which have been foreseen.
Indicated parts sight check to verify their integrity in their
surface external part.
The parts must be however changed at the first erosion
signals or breaking.
Check the functionality:
• of the control system parts / safety control;
• of the control devices.
All devices must perform the function for which have
been foreseen. Control directly the devices so that these
ones determine the waiting function.
The actuators and all parts must be however changed to
the first erosion signals or breaking.
Check the absence:
• of strange noises after the starting
During the functionality checking of the control devices,
if there are strange noises, due for example to a seizing
or mechanical breaks, stop immediately the machine
and activate the maintenance service.
Check the absence:
• of oil trails both on the machine support ground both
in the Archimedean screw
Both during the working, both at the end of every work,
both in the assembly moment of the grinding group,
check the oil trails absence in the indicated parts. If
there are some fluid drops stop immediately the
machine and activate the maintenance service.
For any intervention type or for the parts change
that are damaged, activate the maintenance ser-
vice. The possible change must happen with man-
ufacturer original products or at least of quality,
safety and equivalent characteristics. For analysis
contact the Authorized Assistance Center.
