Hendi 212028, Руководство пользователя

Страница: 7 / 68

7
EN
Cleaning and Maintenance
ATTENTION: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning & storage.
Cleaning
• Clean the appliance after each use.
• Never immerse the appliance in water or other
liquids.
• Clean the outer surface with a slightly damp cloth
or sponge with some mild soap solution.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
• Store the appliance in a cool, clean and dry place.
• Never put objects on the baking surface as it may
crack.
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problems Possible cause Possible solution
Connected to the power supply
but the power switch (2) does not
light up when it is turned on.
Power plug is not connected
properly to the electrical power
supply.
Check again to make sure it is
connected properly.
Power switch (2) defective. Contact your supplier.
Hi-limiter (Thermal cut-out) ac-
tivates RESET the Hi-limiter (thermal
cut-out). See RESET on page 6.
The appliance does not heat up
but power switch (2) light up.
Temperature control (1) defective
Contact your supplier.
Heating element defective
Technical specification
Item no. 212028
Operating voltage and frequency 220-240V~ 50/60Hz
Rated input power 3000 W
Temperature setting 50°C ~ 300°C (MAX)
Protection class class I
Waterproof protection class IPX3
Dimension 520x470x(H) mm
Net weight approx. 22 kg
REMARK: Technical specification is subjected to change without prior notification.