ONDA Series
Quick-Mount Hi-Fi Coaxial In-Wall/In-Ceiling Speakers
9
nal (-) of your speaker. Most wire has some indicator (such as color-coding,
ribbing or writing) on one of the two conductors to help you maintain consis
-
tency.
7.
Loosen the rotating clamps by unscrewing them. Make sure that they are
flipped inwards so that your speaker fits into your cutout without nicking your
wall. Then place the speaker carefully into the cutout.
If you have a level, use it to help you correctly align the speaker. Tighten the
wall clamp screws with a screwdriver. This will rotate the wall clamps and se
-
cure the speaker to the wall.
HINT: do not over-tighten the wall clamp screws!
8. Carefully reinstall the grille.
6. UNDER-POWERING VS OVER-POWERING
Most speaker damages are caused by amplifiers with too little power (wattage).
Overdriven amplifiers clip output waveforms and send distortion to the speakers.
Clipping is usually audible; it may vary from a harsh sound to a fuzzy or unclear
sound.
If you hear this condition at loud volume levels, turn down the amplifier volume
until the distortion is no longer present. Damages caused by operating the speak-
ers at distorted volume levels are no covered by warranty.