HELVIA ONDA Series Скачать руководство пользователя страница 7

ONDA Series

Quick-Mount Hi-Fi Coaxial In-Wall/In-Ceiling Speakers

7

• 

Do not listen to sound at a very high level when you are changing the input 

source (for example, from FM Tuner to CD player). Please be sure the power 

amplifier is turned off or master volume is at lower level.

• 

Do not attempt to clean the speakers with chemical solvents as this may 

damage the paint surface. Clean with a dry cloth.

5.1.  Speaker Installation

“Out of the box and into the wall”, that is how easy it is to install ONDA series 

loudspeakers.

If you intend to do the installation yourself, we recommend that you possess 

some skill in the proper use of hand and power tools. You should have a thor

-

ough understanding of local building and fire codes and a familiarity with the area 

behind the wall or ceiling into which you plan to install your speakers.

  The installer is responsible of installation. Please pay attention to 

install speakers according to local safety regulations. If you are not 

sure to install in a safe way these speakers, consult a professional 

installer, your authorized dealer, or a contractor.

Things you will need:

 

y

Pencil for marking the location of installation;

 

y

Keyhole saw, utility knife or material appropriate incising implement for cutting 

drywall or other wall material

 

y

Level

 

y

Screwdriver (preferably powered)

 

y

Power drill with appropriate bit (optional, for starting wall cut)

Steps to be followed:

1. 

Make sure the material into which you plan to mount the speaker (plaster, dry

-

wall,  paneling,  stone,  etc.,)  supports  the  weight  of  the  speakers  (see 

“7. IN-

WALL/IN-CEILING  SPEAKER  PAINTING”  at  page  10  for  the  weight  of  each 

model).

2. 

Make sure the locations you select do not conceal studs, electrical wiring or 

plumbing. Prior to installation, hold the speaker in your chosen location to make 

sure it safely clears obstacles such as studs, corners, beams, lighting fixtures and 

door/window frames. Your cutout must be at least 1” (25mm) from adjoining 

walls or ceiling, internal studs or plumbing.

3. 

Draw a ceiling hole on the wall or ceiling with a diameter corresponding to the 

Содержание ONDA Series





























Отзывы: