2.11 Connection of the sauna heater to the mains
The sauna heater must be connected to the mains by a qualified electrician and in compliance with current
regulations. Sauna heater is connected with a semi-permanent connection. Use A07BB-F or H07RN-F (60245
IEC 66) cables or a corresponding type. Other output cables (signal lamp, electric heating toggle) must also
adhere to these recommendations. Do not use PVC insulated cable as a connection cable for the sauna
heater.
A multipolar (e.g. 7-pole) cable is allowed, if the voltage is the same. In the absence of a separate control
current fuse, the diameter of all cables must be the same, i.e. in accordance with the front fuse.
The connecting box on the sauna wall should be located within the minimum safety clearance specified for the
sauna heater. The maximum height for the connection box is 500 mm from the floor
Image 3 page 10 If the connection box is located at 500 mm distance from the heater, the maximum height is
1000 mm from the floor
Sauna heater insulation resistance: The sauna heater heating elements may absorb moisture from air, e.g.
during storage. This may cause bleeder currents. The moisture will be gone after a few heating sessions. Do
not connect the heater power supply through a ground fault interrupter.
Adhere to the effective electrical safety regulation when installing the sauna heater.
Power
kW
Power supply
cable
H07RN –F/
60245 IEC 66
mm²
400V 3N~
Fuse
A
Power supply
cable
H07RN –F/
60245 IEC 66
mm²
230V 3~
Fuse
A
Power supply
cable
H07RN –F/
60245 IEC 66
mm²
230V 1 N~ / 2~
Fuse
A
4,5
5 x 1,5
3 x 10
4 x 2,5
3 x 16
3 x 4,0
1 x 20
6,0
5 x 1,5
3 x 10
4 x 2,5
3 x 16
3 x 6,0
1 x 35
8,0
5 x 2,5
3 x 16
4 x 6,0
3 x 25
3 x 6,0
1 x 35
Table 2 Cable and Fuse
Product Manual
Vienna STS
9
Содержание VIENNA STS
Страница 114: ...ELEKTRIKERIS 1712 45 171817 1712 60 171817 1712 80 171817 314 SKSM 205 9 A Kasutusjuhend Vienna STS REWARD YOURSELF ...
Страница 142: ......
Страница 143: ......
Страница 144: ......