31
Test the sauna and make
safety measurements
When the installation is done and you have run
through all the steps in the checklist, the only thing
that remains is to test the sauna and make the
safety measurements. The purpose of the testing
is to find out if there are any faults in the heater or
the control panel.
Check the following when testing
1. That the display of the control panel is working.
2. That all the heating elements are warming up.
3. That fan and light works when activated.
4. That the steam unit is working.
The last step of the checklist
is to test the sauna and run
through safety measurements.
Cable packing in the control panel
In
fo
r
m
a
tion
for
the
installer
1 2
3
4
1 2
3
4
Voltage
cable
24V
Temperature
sensor
