23
Install the heater and tempera-
ture sensor
To install the heater requires thoroughness
from the installer. The different models of
sauna heaters have their own specific
installation dimensions, and these must be
followed exactly due to safety reasons.
The heater can only be wall mounted. In
the following pages you will find sketches
for placing the heater in the sauna room
and different options to mount the
temperature sensor. The installation
dimensions are exact – they may not be
deviated from. Observe that you should
not install the heater until you have
connected all the cables (more information
on page 26).
Place the screws in the back plate cover as
showed in the picture. Make sure that the wall
behind the heater, to which the screws are to
be fixed, is strengthened with wood.
In
fo
r
m
a
tion
for
the
installer
Metal-screw 6 x 40 mm
Metal-screw 6 x 16 mm
Install the heater:
1. Study the installation
dimensions in the pictures
and the table (page 24).
2. Mark the walls and floors
where the equipment should
be mounted and holes
should be drilled.
3. Make holes in the wall.
Use a 3,5 mm drill.
4. Screw on the upper screws
(6 x 40 mm) in the wall and
attach the steamer.
5. Fasten the heater on the
wall by screwing on the
two lower screws (6 x 16
mm).
