11
1.
Push ON/OFF
The display show:
2.
Push NORMAL SAUNA
or SAUNA WITH STEAM
The display shows the start time 00:00. It
means that the heater will start immediately after
you have finished the programming.
The indication lamp for the chosen sauna starts to blink
3.
Enter start time (more information on page 9) or
turn on the sauna by pushing the button
PROG OK for three seconds.
1.
Push TEMPERATURE
2.
Push PROG OK
The indication lamp ”Temperature” starts to blink
3.
Change the temperature with arrow buttons
4.
Save the new setting with PROG OK
To turn on the sauna with the last used program means that you will use the same
settings in the control panel as you had in your previous sauna bath. The setting for
start time is however specific for each sauna bath.
With the last used program
Change the settings during
the sauna bath
You can change the settings in the control panel during the sauna bath. Most likely you
sometimes want to change the temperature, duration or humidity during a sauna bath.
or
Turn off the sauna
If you wish to turn off the sauna before or during the sauna bath, push the button START
STOP.
Change the temperature
(3 s)
In
fo
rm
a
tion
for
the
user
