Helmer Scientific Automatic Cell Washing System - UltraCW II
Operation Manual
360386/D
5
Avoiding Injury
Review safety instructions before installing, using, or maintaining the equipment.
♦ Do not move or bump the cell washer during operation.
♦ Before moving unit, disconnect and secure the power cord.
♦ Never physically restrict any moving component.
♦ Avoid removing electrical service panels and access panels unless so instructed.
♦ Use manufacturer supplied power cords only.
♦ Using the equipment in a manner not specified by Helmer may impair the protection provided by the equipment.
CAUTION
Decontaminate parts prior to sending for service or repair. Contact Helmer or your distributor for decontamination
instructions and a Return Authorization Number.
1 .2
General Recommendations
Indications for Use
The Helmer UltraCW
®
II automatic cell washing system is intended to be used for the washing portion of routine blood bank and
laboratory procedures calling for washed red blood cells such as antiglobulin testing, ABO compatibility, Rh, cross matching and
anti-body screening.
The UltraCW
®
II automatic cell washing system should be operated by a trained individual, such as a clinical laboratory technologist
or similar education, as determining whether desired results have been achieved is subjective and dependent upon user
preparation of blood sample, and parameter selection/adjustment.
General Use
Allow the cell washer to come to room temperature before switching power on.
