Export the G-Code and print. Grab a metric ruler
and measure the distance of any axis offset
that exists on the 3D-printed object.
The Red rectangle and the Yellow rectangle should
coincide. If they’re not, measure the offset
between them.
Now you need to setup in Cura the offset.
Go to Machine >Machine Settings:
under Extruder 2 change the Offset X and the Offset Y
to the number that was measure before
(in this example, offset of 2.53mm for X and 0 for Y).
Test the offset and repeat the process if the print
does not looks good.
Example of printed part with a good offset setup:
2,53mm
18
