15
USING PRONTERFACE
You can change the extruder by clicking on the button next to “Tool”, Tool 0 is for the first extruder
and Tool 1 is for the second extruder.
You can load/unload filament using the Pronterface control panel.
To
load,
first
you
need
to
set
the
extruder
heating
temperature
and
wait
for
the
temperature
to
reach
that
value.
You
can
check
progress
on
the
graph.
When
the
extruder
reaches
the
temperature,
then
you
can
click
on
the
Extrude
button
and
insert
the
filament
into
the
extruder.
To
unload,
you
also
need
to
set
the
same
extruder
heating
temperature.
Afterwards,
just
click
the
Reverse
button
and
gently
pull
the
filament
from
the
extruder.
