13
USING THE LCD
You can use the LCD to level the bed also, follow the next steps:
In the LCD push the button to have access to the "info screen";
In "info screen" select "Prepare";
In "Prepare" go to "Move axis"and select "Move 1mm";
In "Move 1mm" select the axis you want to move;
Rotate the button to the right or to the left to make the axis move, (note that the extruder motor
only move if the extruder is heat but in this case you don’t need to move it);
Now, you can use the 3 screws to level the bed, remember that you need to keep the same distance
from the nozzle on all points of the bed (the same way that was referred before).
