TT4000 Series
Operating Instruction
22
6.3
Loading fanfold labels
Figure 10
Feed path of paper with fanfold labels
1.
Loosen knurled screw (1) and slide guide (2) outward completely and swivel it
downward past the roll retainer (3).
2.
Position label stack (4) behind the printer. Ensure that the labels on the strip are
visible from above.
3.
Guide label strip to print unit via the roll retainer (3). See Figure 10.
4.
Push guide (2) against the label strip, swivel it upward against the roll retainer and
tighten knurled screw (1).
5.
Insert label strip into print head (see 6.1.2 on Page 17).
6.
Set label sensor (see 6.1.3 on page 17).
7.
Set label sensor (see 6.1.6 on page 20).
8.
Turn lever (5) clockwise to lock the print head.
