Hellenbrand 109248, Руководство пользователя

Страница: 10 / 18

10
\
ENTER VALVE TYPE 1.0 / 1.25 / 1.5 / 2.0 / 2.0L
ALTERNATOR SYSTEM (As Needed) OFF
SET RINSE OPTION OFF
AUXILIARY MAV TRIGGER RECLAIM
RECLAIM START 20:00 (Ba12 mins)
RECLAIM DURATION 48:00 (Remainder of Brine/Slow Rinse)
AUXILIARY INPUT OFF
SET CYCLE 1 FILL
SET CYCLE 2 SOFTENING
SET CYCLE 3 BACKWASH
SET CYCLE 4 REGENERANT DRAW DN
SET CYCLE 5 RINSE
SET CYCLE 6 END
ALTERNATE FILL TRIGGER OFF
Press NEXT &

for 3 seconds.
Choose “SOFTENING”
Or “FILTERING”
“SOFTENING”
1 – FILL # of SALT SEE SPEC
2 – SOFTENING TIME 120
3 – BACKWASH TIME SEE SPECIFICATION
4 – DRAW TIME SEE SPECIFICATION
5 – RINSE TIME SEE SPECIFICATION
CAPACITY SEE SPECIFICATION
Set RESERVE AUTO
Set REGENERATION TYPE DELAYED
RELAY DRIVER 1 OFF
RELAY DRIVER 2 OFF
SERVICE CALL OFF
Press NEXT &

for 3 seconds.
SET HARDNESS PER APPLICATION
SET DAYS BETWEEN REGEN 14
SET HOUR OF REGENERATION 2:00 AM
SET MINUTE OF REGENERATION 2:00 AM
WATER MANAGEMENT SYSTEM PROGRAMMING:
or select cycle sequence
options as desired
Use
 
arrows to select
H125 Series is factory
programmed with fill
cycle as final cycle.
Press

and

arrows to select desired option. Press NEXT to go to next step (Press REGEN to go to previous step)
Press NEXT &

for 3 seconds or until display changes. Release and Press NEXT &

for 3 seconds again until valve
type is displayed.