Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
129
Wiring diagram for the motors
VENTUR SIDE with Somfy io
Legend
Junction box
Hirschmann connector
Somfy io motor
For more details concerning the electrical connections, powers, operating
instructions and programming, please refer to the enclosed documents of
the manufacturer or the HELLA installation instructions.
With the radio system Somfy io all receivers must be taught one after
another (order does not matter), i.e. do not connect several receivers to
the network at the same time as the radio system does not support a
simultaneous teaching process of multiple components.
M
~
N
L
PE
4
4
1
1
3
3
2
2
Hirschmann
STAK3
Hirschmann
STAS3
1
2
3
Installation Instructions and Instructions for Use
130
Subject to technical modifications
–
Date of Issue March/2021
Wiring diagram for the LED lighting
ONYX / Somfy io
Legend
Junction box
Hirschmann connector
Control unit LED
ONYX/Somfy io
Hirschmann connector
Connecting the LED
strips
For operating instructions and programming, refer to the item "Operating
and configuring Pergola PLUS with ONYX” for ONYX or the documents
provided with ONYX and Somfy.
N
L
N
L
230 V AC
24 V DC
LED
+ -
3
3
3
1
1
2
2
Hirschmann
STAK2
Hirschmann
STAS2
4
4
1
1
3
3
2
2
Hirschmann
STAK3
Hirschmann
STAS3
4
2
LED
3
3
1
1
2
2
LED
3
3
1
1
2
2
LED
3
3
1
1
2
2
5
4
5
4
5
4
5
Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
131
Operation and configuration
Pergola PLUS with ONYX
General
Before configuring Pergola PLUS with ONYX, download HELLA’s free app
ONYX from the App store/Google Play to your smart phone.
Before you can use Pergola PLUS together with ONYX.CENTER or
ONYX.CLICK, it must be added in the ONYX app. You will find everything
about the configuration in the instructions for ONYX.CENTER /
ONYX.CLICK directly in the ONYX app or in the download area on our
homepage https://www.hella.info.
Precondition:
The pergola is already set up and supplied with electricity.
Installation Instructions and Instructions for Use
132
Subject to technical modifications
–
Date of Issue March/2021
Operation and configuration
Pergola PLUS with ONYX
Slat roof drive
The slats are tilted by activating a hand-held radio transmitter or an
automatic device. The slats turn in the range from 0° (0%) to 120° (100%).
Pergola PLUS is displayed as ONYX.INSIDE when it is taught in the
ONYX App. As soon as a connection to the control unit has been
established for the first
time, the unit type “Slat roof” is adopted.
Stand alone configuration with ONYX.CLICK
To configure Pergola PLUS, you first have to connect to the ONYX.CLICK
hand-held radio transmitter via the ONYX app. The slat roof is configured
and added under
“Configure devices” and “+”. All settings for existing
sensors can be made under “
” and “Advanced setting” of the respective
device.
Smart home configuration with ONYX.CENTER
To configure Pergola PLUS, you simply have to connect to
ONYX.CENTER in
the ONYX app. Use “+” to configure and add the slat
roof. All settings for existing sensors can be made under “Automatic”.
Attention!
When configuring ONYX.CENTER, “Configuration mode” must be active! It
can be found under “Settings”.
