Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
81
Mounting the intermediate column
Design 2
Fig. 14
Mount the socle of the
column (12) and the cover
sheet (13).
Legend
Floor bracket
Floor
Plain washer
Hexagon nut M10
Bracing
Intermediate column
Filister head screw M8x20
Cage nut M8
Basic profile
Countersunk screw M8x20
Box top board
Column base
Cover sheet
Self drilling head screw 3.9x13
Rain gutter
Sealing sheet
12
12
13
Installation Instructions and Instructions for Use
82
Subject to technical modifications
–
Date of Issue March/2021
Mounting an additional column flush with the wall
for the later installation of a VENTURE SIDE
Fix the flange plate (1)
beneath the wall bracket
(7). To fix the flange plate,
the four tapping screws with
countersunk head
3.9x38 mm (2) of the wall
bracket are used.
Position the floor bracket
and fix the anchors to the
floor (do not fix the bracket)
(see chapter “Installation of
an additi
onal column”
Design 1- Fig. 10).
Swing the additional column
inclusive of the inserted
floor bracket in (see chapter
“Installation of an additional
column” Design 1
- Fig. 11).
Push the additional column
upwards onto the flange
plate. Tighten the filister
head screws at the floor.
Put the nuts and the plain
washers onto the anchors
and tighten them (see
chapter “Installation of the
additional column”
- Fig.
12).
1
2
3
4
7
Installation Instructions and Instructions for Use
Subject to technical modifications
–
Date of Issue March/2021
83
Mounting an additional column flush with the wall
for the later installation of a VENTURE SIDE
Fix the column base flush
with the wall (5) using self-
drilling screws (6).
Legend
Flange plate
Tapping screws with countersunk
head 3.9x38 mm
Additional column flush with the
wall
Brush p brush
Column base flush with the wall
Self-drilling screws 4.2x22 mm
Wall bracket TYP A
5
6
30
4
5
6
Installation Instructions and Instructions for Use
84
Subject to technical modifications
–
Date of Issue March/2021
Installation of the VENTUR SIDE
VENTUR SIDE (optional)
Optionally each side of the
pergola VENTUR can be
equipped with the vertical
blind VENTUR SIDE.
Screw the headers to the
column as shown in the
illustration.
Unscrew and remove the
upper cover end sheet from
the guide rail basic profile,
shorten the basic profile if
required and screw the
cover end sheet down
again. Hold the basic profile
to the rain gutter and bed-
plate of the column, adjust it
vertically and screw it to the
column.
Shorten the upper inner
cover sheets of the columns
up to the lower edge of the
rain gutter and screw them
through the guide rails.
Legend
Header
Cylinder head screw M6x20
Plain washer M6
Upper cover sheet
Basic profile
Drilling screw 3.9x19
Upper edge of the guide rail 2 mm
beneath the header (thickness of
the cover sheet)
Inner cover sheets of the columns
1
2
3
4
5
6
6
8
7
10
10
10
