Hella Gutmann CSC-Kit Radar I, Руководство по эксплуатации, Страница: 15 / 20

CSC-Kit Radar I General Information
Care and Maintenance
4 General Information
4.1 Care and Maintenance
As with every tool, the CSC-Kit Radar I should also be handled with care.
• Regularly lubricate moving parts with acid-free and resin-free grease
or oil.
• Re-tighten the mounting bolts regularly.
• Regularly clean the CSC-Kit Radar I with non-aggressive cleaning
agents.
• Use commercial household cleaning detergents and a moistened, soft
cleaning cloth.
• Replace damaged accessories immediately.
• Always use original spare parts.
4.2 Disposal
NOTE
The guidelines listed here are exclusively valid within the
European Union.
In compliance with directive 2012/19/EU of the European Parliament and
Council dated 04. Juli 2012, relating to Waste Electrical and Electronic
Equipment (WEEE), and the German national statute governing the
distribution, return and environmental disposal of electrical and electronic
equipment (Electrical and Electronic Equipment Act – ElektroG) dated 16
March 2005, we are obliged to take back this tool, distributed after 13
August 2005, at the end of its service life and to dispose it in accordance
with the above mentioned regulations.
Because this tool is used exclusively for industrial purposes (B2B), it must
not be handed over to a public disposal facility.
The tool can be disposed of at the following address (specifying the date of
purchase and the tool numbers):
Hella Gutmann Solutions GmbH
Am Krebsbach 2
79241 Ihringen
15