Helios ultra Silence MiniVent M1/150 N / C, Инструкция по установке и эксплуатации

Страница: 21 / 56

MiniVent M1/ 150 N / C
Installation and Operation Instructions
1
EN
1.0 Important information
In order to ensure complete and effective operation and for your own safety, all of the following instructions should be
read carefully and observed.
This document should be regarded as part of the product and as such should be kept accessible and durable to ensure
the safe operation of the fan. All plant-related safety regulations must be observed.
1.1 Warning instructions
The accompanying symbols are safety-relevant prominent warning sym-
bols. All safety regulations and/or symbols in this document must be ab-
solutely adhered to, so that any risks of injury and dangerous situations
are avoided!
1.2 Safety instructions
Special regulations apply for use, connection and operation; consultation is requi-
red in case of doubt. Further information can be found in the relevant standards
and legal texts.
With regard to all work on the fan, the generally applicable safety at work
and accident prevention regulations must be observed!
• The following must be observed before all cleaning, installation, servi
cing and maintenance work or before opening the terminal compart-
ment:
– Isolate the device from the mains power supply and secure against
being switched on again!
– The rotating parts must first come to a standstill!
– Once the rotating parts come to a standstill, a waiting time of 3 min.
must be observed, as dangerous voltages may be present due to in-
ternal capacitors even after disconnection from the mains!
• All plant-related safety regulations must be observed! If applicable, fur-
ther country-specific regulations must also be observed!
• The protection against contact pursuant to DIN EN 13857 must be en
sured when installed (see section 2.7)!
Contact with rotating parts must be avoided.
• A uniform inflow and free outlet must be ensured!
CHAPTER 1
SAFETY
m
DANGER
m
WARNING
m
CAUTION
m
DANGER