Helion Select Four 10 sc Скачать руководство пользователя

Страница: 9 / 42

Radient Reaktor60-4T Brushless System Overview

The Radient Reaktor series brushless motor and ESC is a great power plant

to satisfy your need for speed and performance, not just an entry level

brushless system, your Reaktor system has some of the most advanced

technology in ESC and motor development in the industry today. Here are

some great features we included that help keep your system running in top

shape ensuring maximum enjoyment potential.

CAUTION: ALWAYS ALLOW YOUR MOTOR TO COOL BETWEEN RUNS. EXCESSIVE

ACCELERATION AND AGGRESSIVE DRIVING WILL CAUSE YOUR SYSTEM TO GET

HOT. EXCERCISE GREAT CARE WHEN HANDLING YOUR VEHICLE AFTER RUNNING

TO AVOID GETTING BURNED.

Some Great Features of your ESC

• Total System Protection (TSP) is an exclusive technology which protects

your entire system against typical failures experienced and sometimes

caused by by new users.

CAUTION: ALTHOUGH TSP HAS BEEN ENGINEERED TO PROVIDE THE MAXIMUM

PROTECTION AVAILABLE TODAY, IT IN NO WAY MAKES FAILING PRODUCT

IMPOSSIBLE. TSP PROVIDES ADDED PROTECTION AGAINST THE MOST COMMON

TYPES OF FAILURES EXPERIENCED AND SOMETIMES INDUCED BY NEW USERS.

• Ready for all weather conditions allowing you to experience the fun of

rain, puddles and snow.

CAUTION: REMOVE THE COOLING FAN WHEN RUNNING IN WATER TO PREVENT

FAN OVERLOAD AND FAILURE. AFTER RUNNING, CLEAN AND THEN DRY THE ESC

AND FAN TO AVOID OXIDATION OF THE COPPER CONNECTORS.

• Specially designed for RC car and truck, with excellent start-up,

acceleration and linearity features.

• Compatible with sensorless brushless motors.

• 2 running modes suitable for different applications (“Forward with brake”

mode, “Forward/Backward with brake” mode).

• Proportional ABS brake function with 4 steps of maximum brake force

adjustment, 8 steps of drag-brake force adjustment.

• 4 start modes (“Punch”) from “Soft” to “Very aggressive” to be suitable

for different chassis, tires and tracks.

• Multiple protection features: Low voltage cut-off protection for LiPo or

NiMH battery / Over-heat protection / Throttle signal loss protection /

Motor blocked protection.

• Easily programmed with the “SET” button on the ESC or with the LED

Program Card.

Your ESC has been pre-installed at the factory but before using your

vehicle each time it is good to double check the wiring for damage or loose

connections to ensure everything is in working order before use. Refer to the

diagram below to check the connections of your electronics system. Some

brushless motors such as the Reaktor included with your vehicle use only

Содержание Select Four 10 sc











































Результаты поиска

Содержание Select Four 10 sc

Отзывы:

Похожие инструкции для Select Four 10 sc

Бренды по названию

Популярные бренды

Helion Select Four 10 sc, Руководство пользователя и техническая информация

Результаты поиска

Содержание Select Four 10 sc

Отзывы:

Похожие инструкции для Select Four 10 sc

Бренды по названию

Популярные бренды