Page 28
2
Spray the rubber sleeve with silicon spray
and pull it over the small metal pin of the
Heliocol repair handle.
3
Stretch and relax the rubber sleeve couple
of times over the metal pin.
4
Using the repair handle gently push the rubber sleeve into one of the holes created by the
removal of the riser, until only the head is showing.
5
Push a plastic repair plug all the way down into the repair sleeve. You may use the rear
part of the handle to push it firmly into the sleeve.
6
The hole is plugged and will not leak.
Repeat steps 4 and 5 for the hole in the header at the other end of the panel.
7
Cut the removed riser so it fits exactly between the broad heads of the plastic pins.
8
Fit the riser onto the stubs of the two repair plugs.
The panel is now leak free while its uniform appearance is restored.
Page 28
