completely under the cargo and make the cargo placed on it evenly. Do not raise an object
completely under the cargo and make the cargo placed on it evenly. Do not raise an object
with one fork end.
with one fork end.
(5) The starting, turning, driving, braking and stopping operation
(5) The starting, turning, driving, braking and stopping operation
of the truck should
of the truck should
be done smoothly. When steering on the humid or low friction road, the truck should be
be done smoothly. When steering on the humid or low friction road, the truck should be
decelerated.
decelerated.
(6) Travel with loads as low as
(6) Travel with loads as low as
possible and tilted backwa
possible and tilted backwa
rd.
rd.
(7) Be careful when traveling on a
(7) Be careful when traveling on a
slope. When climbing grades with a slope of more
slope. When climbing grades with a slope of more
than 10%, the truck should forward travel, and when descending so grades, backward
than 10%, the truck should forward travel, and when descending so grades, backward
travel. Never turning on a slope. Avoid loading and unloading operation when decending.
travel. Never turning on a slope. Avoid loading and unloading operation when decending.
(8) Pay attention to pedestrian, obstacle and bumpy
(8) Pay attention to pedestrian, obstacle and bumpy
road when driving. Pay attention
road when driving. Pay attention
to the clearance over forklift truck.
to the clearance over forklift truck.
(9) Never allow any pers
(9) Never allow any pers
ons to stand on the forks or the truck to carry persons.
ons to stand on the forks or the truck to carry persons.
(10) Never permit anyone to stand or walk under upraised forks.
(10) Never permit anyone to stand or walk under upraised forks.
(11) Don’t
(11) Don’t
operate truc
operate truc
k and attachment of it at any positio
k and attachment of it at any positio
n out of the drive seat.
n out of the drive seat.
(12) On the high lift forklift truck, when the lift high more than 3m, it is noted that the
(12) On the high lift forklift truck, when the lift high more than 3m, it is noted that the
goods on it should not fall down or the protect
goods on it should not fall down or the protect
ion measures must be taken if neces
ion measures must be taken if neces
sary.
sary.
(13) Tilt the mast of the high lift forklift truck as backward as possible while the truck
(13) Tilt the mast of the high lift forklift truck as backward as possible while the truck
working
working
. Use minimum forward tilt angle and Min. reverse tilt when loading and unloading.
. Use minimum forward tilt angle and Min. reverse tilt when loading and unloading.
(14) Be careful and slowly driving over a dockboard or bridge-pl
(14) Be careful and slowly driving over a dockboard or bridge-pl
ate.
ate.
(15) Shut down the en
(15) Shut down the en
gine and don’t stay on the truck when fillin
gine and don’t stay on the truck when fillin
g fuel. Don’t ignite
g fuel. Don’t ignite
the engine while checking battery or fuel lever.
the engine while checking battery or fuel lever.
(16) The unloaded forklift truck with attachments should be operated as a loaded
(16) The unloaded forklift truck with attachments should be operated as a loaded
truck.
truck.
(17) Don’t
(17) Don’t
handle unfixe
handle unfixe
d stacked goods.B
d stacked goods.B
e careful to bulky goods to be handled.
e careful to bulky goods to be handled.
(18) If leaving the truc
(18) If leaving the truc
k, lower the forks on the ground and let the shift lever to neutra
k, lower the forks on the ground and let the shift lever to neutra
l,
l,
shut down the engine or cut down electric supply. If parking on a slope is unavoidable,
shut down the engine or cut down electric supply. If parking on a slope is unavoidable,
apply the parking brake and block the wheels.
apply the parking brake and block the wheels.
(19) Don’t
(19) Don’t
open the radiato
open the radiato
r cap when the engine is worm.
r cap when the engine is worm.
(20) Don’t adjust the control valve and relief valve at will to prevent the
(20) Don’t adjust the control valve and relief valve at will to prevent the
damage of
damage of
hydraulic system and its components because of excessive pressure passing them.
hydraulic system and its components because of excessive pressure passing them.
(21) According to the measure method specified in JB/T3300,max.noise at the
(21) According to the measure method specified in JB/T3300,max.noise at the
outboar
outboar
d of the
d of the
truck should be not more than 89dB(A).
truck should be not more than 89dB(A).
(22) Notice and be famil
(22) Notice and be famil
iar with all kinds of decal’s
iar with all kinds of decal’s
function
function
.
.
-2
-2
-
-
https://www.besttruckmanuals.com/
