HELI green Series Скачать руководство пользователя страница 35

Страница: 35 / 82

explosion and a fire. Keep away from a fire.

(26) Charge the battery at a temperature lower than 35

℃。

Hydrogen gas is occurred during charging lead acid battery. The battery is heated

for chemical reaction. Please charge the battery when its temperature is lower than

℃

. When its temperature of lead acid battery is higher than 50

℃，

please stop

charging at once. Recharge until its temperature is lower than 35

℃

(27) The battery of the truck has a high voltage.

The truck which uses battery to provide drive power has a high voltage. The

battery’s voltage is up to 48V commonly. Do not touch the electric conductor of the

battery when installing and serving. There is a danger of get burnt.

(28) Wearing safeguard

When servicing the battery such as refilling electrolyte and adjusting the specific

gravity of all cells, please wear goggles, rubber gloves and boots.

(29) Be care of static electricity when clean the battery.

Do not use a dry cloth, a chemical fiber cloth for cleaning the battery surface.

And do not cover the battery by a vinyl sheet. It causes a ignite explosion by a static

electricity.

(30) Be care of a static electricity of our body.

Please clear s static electricity of our body away from the battery before

inspection.

(31) Please obey the government’s rules when handle with the waster of the forklift

truck.

The waster of the forklift truck must be reclaimed obeying the government’s

rules. Do not drain the waster at will.

13. Plates

The plates sticking on the trucks are used to explain to the driver how to operate

the truck and what to pay attention to. When any of them fall off, please re-stick it at

Содержание green Series



















































































Результаты поиска

Содержание green Series

Отзывы:

Бренды по названию

Популярные бренды

HELI green Series, Руководство оператора

Результаты поиска

Содержание green Series

Отзывы:

Бренды по названию

Популярные бренды