HELI green Series Скачать руководство пользователя страница 14

Страница: 14 / 82

7. Transporting

Load and unload the goods on flat and solid surface. Besides, take care of

connecting plate length, width and strength and make sure it is reliable and safe. In

rainy days, use anti-slip connecting plate or stop working.

When handling goods from or to the truck, it is very safe to use the truck

assembled with jack and winch.

8. What vehicle the reach truck is

(1) Keep the balance of the truck

The reach truck is equipped with the fork in the lifting system that can move

forward and backward. The supporting point of the reach truck is its front wheels

which balance the truck’s center of gravity with the goods’. For this reason, the center

of gravity of the truck together with the goods’ are important for truck safety.

The stability of the truck will be improved a lot when the fork is drawn back.

Содержание green Series



















































































Результаты поиска

Содержание green Series

Отзывы:

Бренды по названию

Популярные бренды

HELI green Series, Руководство оператора

Результаты поиска

Содержание green Series

Отзывы:

Бренды по названию

Популярные бренды