15
9. Driving
(1) Read this manual before driving
Prior to operation, read this carefully to ensure safety and efficient material
handling by proper driving and maintenance,
This manual should be kept by operator and read it carefully.
(2) Attention before the start
When you start the truck, please obey the following rules:
Check if all operating levers position are in neutral position
Make sure foot is away from braking pedal
Begin operation after ensuing the safety around
WARNING
Operate the truck on designated operating position.
Prohibition of reach lever operating when your body is between the
mast and chassis or this will lead to a dangerous condition unexpectedly.
Operate the mast on the designated operating position.
(3) Change the direction after the truck is stopped.
Sharp direction changing is very dangerous.
(4) Do not drive or make a turn with forks lifted up.
When travelling with lifted forks, this could cause an unstable condition and a
turn over of the truck.
(5) Lower the center of gravity
Tilt the mast backward and keep the fork about 20cm above the ground when
Содержание green Series
