HELI green Series, Руководство оператора

Страница: 17 / 82

14
(4) The max loading weight (the loading weight and its center)
The horizontal distance from the center of gravity of the loading to the bottom of
the fork arm (in front of the load backrest) called the load center distance. The
maximum weight that can load in the just load center called the maximum loading
capacity.
The capacity chart showing the relationship of the maximum loading capacity to
the load center distance. It paste in the truck as a plate. The load center moves forward
to the fork arm as well as the combine weight and the load capacity decrease too.
load curve
(5) Acceleration, deceleration and the rolling radius of the truck
A quiescent object will be keeping its state if out of outside force. And it is
applicable to the moving object also. This is called inertia.
The inertia is of the same direction when the truck moving forward. The inertia
will increase with the increasing of speed. While braking, the inertia will make the
truck overturn to the forward. It is dangerous while braking emergently for it will
largen the overturn force. in addition, when rolling the truck, the rolling center’s
centrifugal force acts. The truck makes the truck overturn to the outside, especially the
stably area around the truck. So you should decelerate the truck while rolling
overturn.
When the loading is lifted, the combine barycenter will rise too. It is dangerous
to overturn to the forward or sideward.