background image

19

Reusing again

After cleaning or maintenance, the following operations must be performed before the

vehicle can be reused.

Check the function of the alarm.

Check the function of emergency stop switch.

Check the function of the brake.

Lubricate the vehicle according to the maintenance diagram.If the car is parked for long

term, the wheels around the ground may be flat slightly.

After a short ride, the flat part will automatically recover.

5.3.4 Disuse and storage

If the vehicle is out of service for more than 2 months, it must be stored in a frost- free dry

space. The vehicle must be supported with a bracket and all wheels must be off the ground
during storage. Only in this way the wheels and wheel bearings can be protected from
damage during storage.

Precautions before storage

-- Clean the vehicle completely.
-- Check the brake.
-- Apply a thin layer of oil or grease to all mechanical parts that have not been painted.
-- Clean the battery, the lead acid battery should be covered with special grease on the electrode
bolts. Recharge the battery.
-- Please comply with the battery manufacturer's operating instructions and regulations.
- Spray all exposed contact surfaces with suitable spray.

After the vehicle is put into use, the driver should test the braking performance

repeatedly.

5.3.5 Safety inspection on the vehicle regularly or in case of abnormal
conditions

Safety inspection shall be conducted in accordance with relevant national regulations.
Professionals trained by our company can provide customers with thoughtful security

services. The vehicle must be inspected by a professional at least once a year (note national
regulations) or in abnormal state. Inspectors must take operation safety as the starting point and
objectively and accurately evaluate the performance and state of the equipment. Inspectors must
have sufficient work experience to be able to evaluate the condition of equipment and the normal

Caution

Charging every month, otherwise it will lacking

of electricity which lead to battery performance

decline or damaged.

Содержание 14-850





















Отзывы: