HELI 14-850, Руководство по эксплуатации и обслуживанию

Страница: 14 / 20

14
5.2 Safety regulation for maintenance
5.2.1 Service person
Vehicle maintenance and repair can only be carried out by the company's professional
technicians.
The company's service department has a team of technicians in charge of service. They
have been specially trained to be competent in various maintenance operations of the equipment.
We suggest that users sign a maintenance contract with our service point.
5.2.2 Lifting and jacking equipment
When lifting the vehicle, the lifting tool can only be installed in the specified fixed position.
When jacking up the vehicle, the equipment must be fixed with appropriate tools, such as
wedge blocks, wooden blocks, etc., to prevent the risk of accidental rolling or tipping over.
If it is necessary to operate under the lifting load parts, the Fork must be secured with a
strong enough chain.
5.2.3 Clean operation
Do not wash the vehicle with flammable liquid.
Before starting the cleaning operation, all necessary safety measures must be taken and
sparks (e.g. due to a short circuit) must be prevented during the operation. If the vehicle is
battery-powered, disconnect the battery cable.
When cleaning electrical and electronic components, use low-strength suction or
compressed air. At the same time, use a non-conductive, anti-static brush to clean the dust on
the surface of the component.
If the vehicle is washed with a water gun or high-pressure cleaning equipment, all 8electrical
and electronic components must be carefully covered in advance, or the components may be
affected by moisture, resulting in functional failure.
Steam stream cleaning equipment shall not be used.
After the cleaning operation is completed, the operation steps specified in the
"recommissioning" section must be followed.
5.2.4 Operation to the electrical system
Operations related to electrical systems must be performed by professionals trained in
electrical technology.
Before commencing operation, the operator must take all necessary measures to prevent an
electrical accident.
If the vehicle is battery-powered, the key switch must be pulled out to prevent the vehicle
from being started accidentally.