Installation instructions Art. No.49609
Page 1 of 2
Status 10.2012
GB Installation and operating instructions
LED WORK LAMP WITH MAGNETIC POINT
Art. No. 49609
Congratulations for deciding to buy our product.
Our Work lamp is made out of sturdy, high value materials and will provide you with quality lighting.
The Work lamp is used indoors.
Please read through the installation and operation instructions carefully and keep these in a
safe place for later reference.
We do not accept liability for damage to persons or property caused by non observation of the
instructions, improper handling or for unauthorized changes made to the product.
Package contents:
1Work light
Installation and operating instructions
Article Supply
Illuminant
Protection
type
Protection
class
49609
3x battery AAA,
1.5V
24 LED, illuminants
cannot be exchanged
IP 20
III
Safety and warning notes
Take the parts carefully out of the packaging.
Make sure, before using the Work light that it has not been damaged during transportation.
Use is forbidden if there is damage.
Keep packaging materials well away from children and pets.
Be careful. The packaging contains small parts which can be swallowed by small children.
Do not look directly into the LED - especially for longer periods of time - without protecting
your eyes. A LED beam should not be directed into other people's eyes.
Never make your own repairs to faulty parts. Repairs must be done by trained specialists.
Do not expose the product to extreme heat or exposed flames.
The entire product must neither be changed nor converted. Changes made to the product lead
to invalidation of the guarantee (warranty).
The rating plate must not be removed.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
