Installation instructions Art. No.49609
Page 2 of 2
Status 10.2012
Disposal:
Old electronic equipment must be brought to public connection points and must not be
disposed of as household waste.
Batteries must not be disposed of in the household waste. You are legally obliged, as a final
consumer, to return used batteries. You can return batteries after use to the sales point or the
immediate vicinity (public collection points or retail outlets, for example, without charge).
Batteries containing harmful agents are marked with the "crossed out waste bin" and with one
of the chemical symbols Cd (= battery contains cadmium), Hg (= battery contains mercury) or
Pb (= battery contains lead).
Batteries may only be returned in a drained to the used battery bin at the retail outlet and at
public disposal outlets. Batteries which are not completely drained must be prevented from
short circuiting. Short circuiting can be prevented by taping over the terminals with adhesive
tape.
Care and servicing:
Remove the batteries and store in dry, protected rooms if the product is not being used over a
longer period of time.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals, solvents, alcohol or abrasives for cleaning.
Operation:
A sliding switch on the underside is used for switching on and off.
The holder can be fastened with screws and also with integrated magnets to metal surfaces.
Make sure that no water can collect at the place where the light is fixed.
The rating plate must not be removed.
Make sure that the base and the fastening materials are suitable to support the weight of the
light permanently and reliably.
Please do not place this product in the direct sunshine or in a damp, hot or dusty environment.
The Work lamp is only suitable for indoor rooms.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
