Heinner VMC002 Скачать руководство пользователя страница 9

 

 

 

                                                                                                             

Gasoline grass trimmer 

Faulty cutting equipment or an incorrectly sharpened blade increases the risk of accidents. When 
the  engine  is  started  with  the  choke  in  either  the  choke  or  start  throttle  positions  the  cutting 
equipment starts to rotate immediately.  
Never start the machine indoors. Bear in mind the dangers of inhaling the engine's exhaust fumes. 
Observe your surroundings and make sure that there is no risk of people or animals coming into 
contact with the cutting equipment.  
Place the machine on the ground, ensure the cutting equipment runs free of twigs and stones. Push 
the machine body towards the ground using your left hand. (NOTE! Not with your foot). Grip the 
starter handle with your right hand and pull the starter cord.  
 

Fuel safety 
 

 

Always use a fuel  container with an anti-spill valve. 

 

Never fill the machine  while the engine is  running. Always 

stop the  engine and let it cool for  a few minutes before 
refuelling. 

 

Provide good ventilation  when filling or mixing  fuel (petrol 

and 2-stroke oil). 

 

Move the machine at least  3 m from the filling  position before 

starting. 
 

 

Never start the machine: 

 
a) If you have spilt fuel on it.  Wipe up all spillage. 
b) If you have spilt fuel on  yourself or your clothes.  Change your 
clothes. 
c) If there is a fuel leak.  Make regular checks for  leakage from the 
fuel cap  and the fuel supply pipes. 

 

 

 
 
 
 
 
 
Min 3 m 

 

Transport and storage 

 

Store and transport the machine and fuel so that any  leakage or fumes do not risk coming into 

contact  with sparks or naked flames. For example, electric  machines, electric motors, electrical 
switches/power switches, heaters or the like. 

 

When storing and transporting fuel approved containers intended for this purpose must be 

used. 

 

When  storing  the  machine  for  long  periods  the  fuel  tank  must  be  emptied.  Contact  your 

local petrol station to find out how to dispose of excess  fuel. 

 

 

Содержание VMC002

























Отзывы: