Heinner VMC002 Скачать руководство пользователя страница 23

 

 

 

                                                                                                             

Gasoline grass trimmer 

SPECIFICATIONS 

 

MODEL ______ 

Engine Type:  .....Air cooled, two-stroke, single cylinder gasoline engine  
Engine data

  ........................................................................ LDBC520  

Engine model : .......................................................................... IE44F-5  
Stroke: ...................................................................................... 2 Stroke  
Displacement:  ............................................................................... 52 ml  
Fuel Consumption:  ............................................................... 750g/kw.h  
Max. Power :  ............................................................................. 1.45kw  
Wide Open Throttle Speed :  ................................................. 5200 RPM  
Idle Speed  .................................................................... 2800±200 RPM  
Engage Speed  ................................................. No less than 3400 RPM  
Exhaust  .............................................................. Spark Arrestor Muffler  
Carburetor  ................................................................. diaphragm model  
Ignition System  ............... Flywheel magneto, capacitor discharge (CDI)  
Spark Plug  ..................................................................... TORCH BM6A  
Fuel/Oil Ratio  ................................ 25:1 two-stroke air cooled engine oil  
Gasoline  ........................................................ RQ-90 Octane unleaded.  
Oil  ............................ TC grade high performance, two-stroke engine oil  
Fuel Tank Capacity  ...................................................................... 1.2 lit.  
Starter System  ................................................ Automatic Recoil Starter  
Clutch  .......................................................................... Centrifugal Type  
Rotating Direction  .......................... Counter Clockwise viewed from top  
Shoulder Harness  ..........................................................Single Harness  

 

*Specifications are subject to change without notice. 

 

RECYCLING 

Electrical and electronic equipment waste (WEEE) might contain dangerous materials 
which can have a negative impact on the environment and human health if not 
collected separately. 
This item is in conformity with the European Directive EU WEEE (2012/19/EU) and is 
marked with an electronic and electrical waste logo graphically represented in the 
image below. 
      

This icon shows that WEEE should not be collected with household waste but 
separately. 
We recommend you to consider the following: 

       - Materials and components used when manufacturing this item are high quality 
materials which can be reused and recycled; 

Содержание VMC002

























Отзывы: