Gasoline grass trimmer
Adjusting the harness
Quick release
On the front is an easily accessible, quick
release catch:
• Pull out the red strap.
• The hip strap and oneshoulder strap will
beautomatically released at thesame time and
theharness and the engine unitwill slide to the
ground.
Use this if the engine should catch fire or in any
other emergency situation when you quickly
need to take off the harness and machine.
Assembling the trimmer head
Fit the upper plate (D)and adapter housing(C) to the
output axle.
Turn the blade axle until one of the holes in the upper
plate aligns with the hole(F) in the gear housing(E).
Insert a locking pin in the hole (F)so that the axle is
locked.
Place the low plate (B) and nylon trimmer head (A) on
the output shaft.
Screw on the trimmer head (A) in the direction of
rotation.
Assembling the main shaft
Loosen the screw(A) and two bolts(C).
Insert the main shaft tube into the gear housing.
Turn the blade axle and push the main shaft
tube in until the holes(B) in the main shaft tube
aligns with the hole(A) in the gear housing.
Tighten the screw(A) and two bolts(C), so that
the main shaft tube is locked.
