Gasoline grass trimmer
1. Throttle trigger lock
The throttle trigger lock is designed to prevent the throttle
from accidentally being engaged. When the trigger lock (
is pressed into the handle (= when you hold the handle)
the throttle (B) is released. When the grip on the handle is
released the throttle and the throttle trigger lock return to
their original positions. This takes place via two
independent return spring systems. This means that the
throttle is automatically locked in its "idling" position.
2. Stop switch
The stop switch should be used to stop the engine.
3.Debris shield
This debris shield is intended to prevent objects from
being thrown towards the operator and to protect the
operator from unintentional contact with the cutting
attachment.
WARNING!
Under no circumstances may the cutting equipment be used without an
approved debris shield fitted.
SAFETY INSTRUCTIONS
Control and service of the machine’s safety equipment
1. Throttle trigger lock
Check that the throttle is locked in the "idling position" when the throttle trigger lock is in its original
position.
Press in the throttle trigger lock and make sure it returns to its original position when released.
Ensure that the throttle and throttle trigger lock move easily and that their return spring systems
function.
See section
"Start".
Start the machine and apply full throttle. Release the throttle and check that the
cutting equipment stops and remains at a standstill. If the cutting equipment rotates with the throttle
in the idling position then the carburetor's idling setting must be checked.
2. Stop switch
Start the engine and make sure that the engine stops when the stop switch is moved to the stop.
3. Debris shield
Check that the shield is undamaged and not cracked.
Replace the shield if it has been exposed to impact or is cracked.
Always use the prescribed blade and shield combination.
4. Blade and Trimmer head
1) Grass blades are intended for brush cutting.
