www.heinner.com 1300W, 50/60Hz, 220-240V
18
Note: never assemble blade and blade disk when use for making sausage and do not
assemble sausage pole when blending meat.
3. Set clean small intestine to sausage pole as the figure 5, then place blended meat
powder into funnel.
4. After the blending function which mention above (Sinewless, boneless and fatless
meat is recommended, approximate size: 20 mm x 20 mm x 60 mm), put the meat into
this function “Making sausage”.
5. Press the rocker switch to “ON” position, the appliance turns anti-clockwise and the
meat powder enters the small intestine, you can tie anywhere you like with thread to
make the sausage has proper length.
Reverse function
1.
In case of jamming press the rocker switch to “0” position. Wait at least one minute
until ream meat rod has come to a complete stop.
2.
Press the rocker switch to ‘R’ position. Ream meat rod will be rotating anti-clockwise
and the ream meat tube will get empty. If the main machine doesn’t work, press the
rocker ‘o’ and clean it.
Note: the ‘R’ position max operation time shall not exceed 5s.
Fig. 5
