www.heinner.com 1300W, 50/60Hz, 220-240V
20
4. Assemble the screw rod, squeezing tube, press cover, dreg discharge tube, juice spout as
illustrated as figure (see fig. 10)
5. Put the funnel insert the connect ring.
6. Put clean cup below the juice spout to catch juice, put another bowl below the dreg
discharge tube to catch dreg.
7. Put power cord plug into power socket, make power on.
8. Press “ON” button, the squeezing tube working, after product working normally, put the
tomato, grape into funnel hole, and push down to the lowest position by food pusher. Note:
The fruit size can’t be too big; can’t cut too hard fruit and vegetable for example the apple,
carrot.
9
．
Making juice: after working 15 seconds or making juice for 200g fruit, take a rest of 2
minutes, this is one cycle (clean the filter and squeezing tube when rest), can work 5 cycles, it
means making juice for 1000g fruit.
10. Disassembling method of squeezing tube and main body: press the release button by left
hand, then turn out the squeezing tube in clockwise. Loosen your left hand, at this time, the
squeezing tube had been taken out. (Note: this process must be operated in power off
condition).
